GPS Compass - KGC-222


FEATURES

  • 4.0" LCD display unit KGC-222 consists of two main components, display and antenna. Display unit has processor, receiver and LCD display built-in.
  • Backup sensor built-in. The backup sensor enables to output heading even if the GPS signals are interrupted in such case as the vessel passing under a bridge.
  • Pitch / roll and heaving data output. When KGC-222 is used with an echo sounder with heaving compensation function, you can obtain stable sea bottom without effect from heaves and waves.
  • 3 heading data output ports expandable to 5 with connecting optional junction box JB-35.
  • SBASS (WASS / EGNOS) enabled.



SPECIFICATIONS

Display size and type 4.0" LCD
Display resolution
128 x 64 pixels
Receiving frequency
1575.42 MHz ± 1 MHz  
Receiving channel
16 channel parallel
Setting time
2 minutes (at standard hot-start time)  
Heading accuracy
1° rms
Heading resolution
0.1° rms
Positioning
Position
GPS: 10m (2 drms, PDOP 3 or less)
accuracy
Velocity
1 m/sec (rms, SA:OFF, PDOP: 3 or less)
Output data level
RS-422
Output data format and sentences
NMEA 0183 Ver.2.0 (ATT, DTM, GGA, GLL, GSA, GSV, HDM, HDT, HVE, MSS, RMC, ROT, VTG, ZDA, PKODA, PKODG1, PKODG7, PKODG21, PKODQ)
NMEA ports
Total 3 : input / output
Dimensions
142(H) x 180(W) x 630(D) mm (GPS antenna GA-12), 131(H) x 220(W) x 90(D) mm (Display unit KGC-222.MU)
Weight
2.2 kg (GA-12), 0.89 kg (KGC-222.MU)
Power supply
10.8 to 31.2 VDC
Power Consumption
(24VDC) 9W or less



BROCHURE

___________________________________________________________________________________________________________

GPS Navigator - KGP-920


Fully compliant with New IMO requirements.


BROCHURE

FEATURES
  • Meeting with New IMO requirements MSC.112(73) and IEC 61108-1 Ed.2 for SOLAS carriage requirements. Approved for U.S. Coast Guard Module B.
  • The KGP-920 GPS Navigator can be used as a GNSS sensor of AIS.  
  • SBAS (Satellite Based Augmentation System) ready.  
  • The true parallel 18 channel GPS receiver provides precise and quick positioning at any time.  
  • The built-in beacon receiver is available as an option. It can be used as a high-accuracy differential GPS navigator.

MAIN SPECIFICATIONS

GPS receiver section
Receiving frequency
1575.42 MHz ± 1 MHz
Receiving channel
18-channel parallel
Sensitivity
Better than -130 dBm
(elevation angle: 5° or over)
Position Accuracy 10 m 2drms (GPS), 5 m 2drms (DGPS), 8 m 2drms (SBAS)

 ___________________________________________________________________________________________________________

MDC-900 Series - Marine Radar

  High-performance, sophisticated signal processing, usually
  found only in larger professional grade radars.



Dual range display

Exclusive dual range radar feature lets you view split-screen display of both long and short-range targets simultaneosly. It's like having two radars in one.


ATA with up to 50 targets as option

The convenient ATA (Automatic Tracking Aid) function comes as option.
The latest movements f other vessels can be shown instantaneosly in vector form and numeric form, ensuring safe navigation.
When the automatic acquisition zone is set, up to 50 targets entering the zone will be locked automatically.


AIS interface up to 100 targets as option

When connected with an AIS receiver, the radar displays information on up to 100 targets including the name, heading, and speed of each vessel with an AIS transmitter mounted.

FEATURES

  • True trail function
    The display shows exactly the movement of other vessels like drawing tails, while land and buoys are shown as stationary objects even while your vessel is moving. This makes it easy for you to distinguish moving from stationary objects.  

  • Dual range display
    Exclusive dual range radar feature lets you view split-screen display of both long and short-range targets simultaneously. It's like having two radars in one.  

  • CCD Camera input
    Accepts CCD camera input, with which you can watch above deck and below deck any time you are steering.  

  • ATA with up to 50 targets as option
    The convenient ATA (Automatic Tracking Aid) function comes as option. The latest movements of other vessels can be shown instantaneously in vector form and numeric form, ensuring safe navigation. If the automatic acquisition zone is set, the targets up to 50 entering the zone will be locked automatically.  

  • AIS interface up to 100 targets as option
    When connected with an AIS receiver, the radar displays information on up to 100 targets including the name, heading, and speed of each vessel with an AIS transmitter mounted.  

  • Direct bonding of AR coating filter to LCD
    The LCD and Anti-Reflecting coating filter are bonded directly to increase visibility and prevent condensation.  

  • Real time smooth Head-up indication
    The picture moves smoothly in proportion to changing bearing.  

  • RGB output
    RGB output available for a connecting external monitor. You can monitor the Radar even when you are away from steering.



The display shows exacly the movement of others vessels like drawing tails, while land and buoys are show as stationery objects even while your vessels is moving. This makes easy fo you to distinguish moving stationery objects.

MAIN SPECIFICATIONS:


MDC-921 - 2 kW / 24 nm / 1.2 ft Radome
MDC-941 - 4 kW / 32 nm / 2 ft Radome
MDC-940 - 4 kW / 48 nm / 3 or 4 ft Open
Dimensions 263(H) x 274(W) x 132(D) mm
Weight 3.3 kg
Power supply 10.8 to 31.2 VDC

BROCHURE





CCD CAMERA Input


Accepts CCD camera input, with which you can watch above deck and below deck any time you are steering. 

 ___________________________________________________________________________________________________________

MDC-2000 Series - Marine radar / ARPA



MAIN SPECIFICATIONS:
 
MDC-2041 - 4kW / 32 nm / 2 ft Radome  
MDC-2040 - 4kW / 48 nm / 3 or 4 ft Opene  
MDC-2060 - 6kW / 64 nm / 4 or 6 ft Open  
MDC-2010 - 12kW/ 72 nm / 4 or 6 ft Open
Dimensions 330.2 (H) x 364(W) x 174.5 (D) mm
Weight 8.1kg
Power supply 10.8 to 31.2 VDC


BROCHURE
FEATURES
  • True trail function * 
    The display shows exactly the movement of other vessels like drawing tails, while land and buoys are shown as stationary objects even while your vessel is moving. This makes it easy for you to distinguish moving from stationary objects.  

  • Dual range display
    Exclusive dual range radar feature lets you view split screen display of both long and short-range targets simultaneously. It's like having two radars in one.  

  • Real time smooth head-up indication
    The picture moves smoothly in proportion to changing bearing.  

  • ATA with up to 50 targets as option *
    The convenient ATA (Automatic Tracking Aid) function comes as option. The latest movements of other vessels can be shown instantaneously in vector form and numeric form, ensuring safe navigation. If the automatic acquisition zone is set, the targets up to 50 entering the zone will be locked automatically.  

  • AIS interface up to 100 targets as option *
    When connected with an AIS receiver, the radar displays information on up to 100 targets including the name, heading, and speed of each vessel with an AIS transmitter mounted.  

  • CCD Camera input
    Accepts CCD camera input, with which you can watch above deck and below deck any time you are steering.  

  • Crisp and viewable display
    The LCD and acrylic sheet with Anti-Reflection coated filter are bonded directly. It increases visibility in direct sunlight and prevents condensation.  
  • RGB output
    RGB output available for a connecting external monitor. You can monitor the Radar even when you are away from steering.

Requires baring data, ship’s speed data and latitude / longitude data input.

 ___________________________________________________________________________________________________________

MDC-2900 SERIES - Marine Radar / ARPA



MAIN SPECIFICATIONS:

MDC-2960 / MDC-2960BB
6 kW / 72 nm / 4 or 6 ft Open
MDC-2910 / MDC-2910BB
12 kW / 72 nm / 4 or 6 ft Open
MDC-2920 / MDC-2920BB
25 kW / 96 nm / 4 or 6 ft Open
Dimensions
374(H) x 450(W) x 277(D) mm (Display unit)
320(H) x 320(W) x 122(D) mm (Processor unit)
141(H) x 385(W) x 64(D) mm (Operation unit)
Weight
15 kg (Display unit)
5.1kg (Processor unit)
1.8 kg (Operation unit)
Power supply
 21.6 to 41.6 VDC

BROCHURE
FEATURES
  • TT (ARPA) function with up to 60 targets as standard The convenient TT (ARPA) function comes as standard. The latest movements of other vessels can be represented instantaneously in vector forms and numeric forms, ensuring safe navigation. Non ARPA type is available.
  • SSP™(Strong Signal Processing) Our signal processing technology provides superior target discrimination for a steady image of unstable targets. It ensures that even small targets are constantly displayed.
  • True trail function The display exactly shows the movement of other vessels like drawing tails, while land and buoys are shown as stationary objects even while your vessel is moving. This makes it easy for you to distinguish moving targets from stationary objects.
  • Map overlay with C-Map chart(NT+ or NT MAX)* as standard function C-Map chart(NT+ or NT MAX) is overlaid on the radar screen to provide clear radar pictures of coastlines, buoys, and other features. *Owner supplied. Basic chart information only.
  • AIS interface with up to 254 targets as standard When connected with an AIS receiver, the radar displays information such as the vessel name, bow direction, and speed of each vessel with an AIS transmitter mounted.
  • CFAR function for automatic gain control CFAR(Constant False Alarm Rate) function is employed with semi-automatic clutter suppression. In comparison with conventional sea and rain clutter controls, it ensures that only the sea-clutter and clouds will disappear, while the targets will always remain on the screen.
  • Easy operation by using track ball and well-arranged keyboard The radar has an independent operation unit, designed for easy access to all system functions. Trackball control with two-color LED lamp for quick-operation day or night.
  • Black Box Black Box type is also available for owner-supplied SXGA monitor in landscape position.

TT (ARPA) Function

True trail function

Map Overlay

AIS Interface

CFAR Function
 ___________________________________________________________________________________________________________ 

CVR-010 (IMO Navigational Echo Sounder)



NEW Koden IMO CVR-010 navigational echo sounder features a 5.7" colour display.

FEATURES

  • Meets IMO Standard MSC.74 (69) Annex 4 and EU Marine Equipment Directive (MED)
  • High Accuracy and Reliability
  • Automatic control for the receiver gain and TVG levels
  • Sounding Data Storage for last 12 hours
  • Password Protection for keeping the menu settings

MAIN SPECIFICATIONS

Main functions
Noise reduction, LOG DATA, White line, VRM, Transducer location Depth reference, Draft, Date/Time, LAT/LON
Basic ranges
5 to 800 (m)
2.5 to 400 (fm)
20 to 4000 (ft)
Output power (RMS)
600 W
Transducer
(1) TGM 60-50-20L (TD-26/20L)
(2) TGM 80-200-20L (TD-65/20L)
Output frequency
(1) 50 kHz
(2) 200 kHz
Water protection
n / a
Dimensions
218 (H) × 248 (W) ×103 (D) mm
Weight
2.2 kg
Power supply
24 VDC (11 to 40 VDC)


BROCHURE

 ___________________________________________________________________________________________________________

CVS-126 (5.7 Inch Color LCD Echo Sounder)

Digital Echo Sounder that always shows a clear image!

FEATURES

  • Uses digital signal processing
    Koden’s advanced digital signal processing technology provides both higher resolution in shallow areas and high gain in deep areas.
  •  Store the Image
    You can store up to 10 images. Connecting the optional GPS sensor also allows you to display the position on the stored image.
  •  Sona-Tone
    This function uses sound to notify users when fish or the school is located.
  •  Automatic functions make operation simple
    Equipped with a full range of automatic functions. (GAIN, RANGE, SHIFT)
  •  High-performance 5.7-inch LCD provides good visibility. The CVS-126 is also highly water resistant.
    High visibility and drip-proof performance (IPX5) mean the CVS-126 can be installed in an open bridge.
  •  Energy-efficient design
    This is an energy-efficient model that achieves low power consumption using a white LED.


MAIN SPECIFICATIONS

Main functions
Zoom, Auto, A-scope, Presentation colors: 64, 16, 8 colors, Store image, Fishing Hot Spot, Sona-Tone
Basic range
2.5 to 800 Meter/ Fathom/ Italian Fathom 10 to 2800 Feet
Output power (RMS)
600 W
Output frequency
Dual 50/200 kHz
Water protection
IPX5
Dimensions
208(H) x 182(W) x 130(D) mm
Weight
1.3 kg
Power supply
10.8 to 31.2 VDC




BROCHURE

 ___________________________________________________________________________________________________________

CVS-128 (8.4 Inch Color LCD Echo Sounder)


Koden Digital Filtering (KDF™) to meet the demands from pleasure to fishery


MAIN SPECIFICATIONS

Main functions
Zoom, Auto, A-scope, Presentation colors: 64, 16, 8 colors, Store image, Fishing Hot Spot, Sona-Tone
Basic range
2.5 to 1200 Meter 
10 to 3600 Feet
2.5 to 700 Fathom/ Italian Fathom
Output power (RMS)
600 W/ 1 kW
Output frequency
Dual 50/200 kHz
Water protection
IPX5
Dimensions
263(H) x 274(W) x 133(D) mm
Weight
3.2 kg
Power supply
10.8 to 31.2 VDC

BROCHURE

FEATURES

  • Koden Digital Filtering (KDF™)
    Eliminates clutter by filtering out the noise to provide a clearer more detailed image that enhances fish targets in shallow and deep depths, making it easier to differentiate between baitfish, larger fish, schools of fish and the sea floor.  

  • 600 W or 1 kW Output Power
    The 1 kW is more suitable for detection at deeper bottom.  

  • RGB Output to VGA Monitor
    RGB output for connecting optional external VGA monitor.  

  • Exclusive Sona-Tone
    Identifies what’s under your boat with different sounds for fish and schools of fish.  

  • Easy Operation
    Easy access to all system functions with backlit keypad, programmable function keys, comprehensive menus, and dedicated rotary knobs for instant control of HF and LF Gain.  

  • Store Image
    Stores up to 10 screen images in built-in memory for recall later by “one-touch”.  

  • Fishing Hot Spot
    Leads you back to your favorite fishing hot spots or other previously saved positions in memory with input from optional GPS sensor.  

  • Auto Function
    Digitally selects the most reliable setting for such functions as Gain, Range, and Shift.  

  • Sunlight Viewable
    Brilliant 8.4” color LCD display with 8, 16, or 64 color levels and an anti-reflective coating for excellent readability in direct sunlight.  

  • Easy Installation
    Sleek, waterproof (IPX5 rating) case design with built-in overhead and flush mounting for easy installation.
 ___________________________________________________________________________________________________________

 

Partner Brands